A novel method to prepare microcellular poly(vinyl alcohol) foam based on thermal processing and supercritical fluid

Combining the thermal processing and supercritical fluid technology develops a novel preparation method of microcellular poly(vinyl alcohol) (PVA). Water, as the plasticizer in system, can form the hydrogen bonding with pendant hydroxyl of PVA and weaken its strong intermolecular and intramolecular forces to realize the thermal processing. Supercritical carbon dioxide (sc‐CO₂) can easily dissolve into water‐plasticized PVA (WPVA) because of the destruction of crystal region caused by water, and the enhanced sc‐CO₂ solubility can greatly improve the foamability of WPVA. The porous structure generates through the saturation of sc‐CO₂ in WPVA sample and followed by pressure drop‐induced phase separation. The foaming behavior of WPVA was studied as a function of saturation pressure, foaming temperature, and saturation time. The cell density, cell size, and distribution of the obtained foam can be controlled by tuning processing conditions. The results revealed that the cell size decreased, and its distribution narrowed with saturation pressure increasing, or decrease of foaming temperature. But excessively increasing the saturation time generated a negative effect on the foaming behavior owing to the deteriorated plasticization effect resulted from the loss of water. Copyright © 2016 John Wiley & Sons, Ltd.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries

Although sodium-ion batteries (SIBs) are considered as alternatives to lithium-ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8-tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox-active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

Structural requirement of C11b chirality of tetrabenazine analogs as VMAT2 imaging ligands: synthesis and in vivo evaluation

We studied on the structural requirement of C11b chirality of tetrabenazine (TBZ) analogs as vesicular monoamine transporter 2 (VMAT2) ligands. TBZ analogs (2, 6a, 6b) and ¹⁸F-radiolabeled [¹⁸F]6a and [¹⁸F]6b with eliminated C11b chirality were synthesized and characterized. Competition studies demonstrated that 2, 6a and 6b displayed much lower in vivo VMAT2 bindings than TBZ. MicroPET imaging studies of [¹⁸F]6a and [¹⁸F]6b showed negligible accumulation in VMAT2-enriched regions as compared with the known VMAT2 ligand ¹⁸F-FP-(+)-DTBZ. These results suggest that C11b chirality of TBZ analogs is essential for in vivo VMAT2 binding bioactivity.     

Chemical treatments on the cuticle layer enhancing the uranium(VI) uptake from aqueous solution by amidoximated wool fibers

Urea, sodium hydroxide and sodium sulfide were used to treat the cuticle layer of wool before graft copolymerization and amidoximation to enhance the uranium uptaking capacity of amidoximated wool fiber based adsorbent (Wool-g-AOs). The wool-g-AOs were used for recovery of U(VI) from aqueous solutions. The simulated nuclear industry effluent was used for investigating the selectivity and industrial applicability of Wool-g-AOs. The adsorption of uranium(VI) on Wool-g-AOs was pH dependent. The Langmuir model fitted well with the equilibrium data. Kinetic data were fitted well to pseudo second order model.

     

Denitration of simulated high-level liquid waste by formic acid for the connection of PUREX process with TRPO process

Journal of Radioanalytical and Nuclear Chemistry - Denitration of simulated high level liquid waste (HLLW) by formic acid was performed for the connection of Plutonium Uranium Recovery by...     

金属有机骨架基催化剂在加氢反应中的应用

加氢是现代化工产业中的一类主干反应,广泛应用于精细化学品、药物、食品、染料、功能聚合物及香料等制造产业中.高效催化剂的引入使得加氢反应能够在相对温和的条件下还原各类不饱和化合物.金属催化剂在加氢反应中活性高,所需的反应温度较低,适用性广,但是容易和S,N,As和P等元素结合而"中毒"失去反应活性.金属氧化物催化剂和金属硫化物催化剂具有一定的抗毒性,但活性相对较差,通常需要采用高温高压的反应条件,对催化剂本身和反应器的要求较为苛刻.传统催化剂在反应中具有一定的局限性,所以亟需开发新一代高效的加氢催化剂,在保证高活性和高选择性催化效果的同时,降低对能源的消耗和对环境的负面影响.金属有机骨架(MOFs)作为一种新型的多孔材料在过去二十年中受到相当大的关注,并在催化、气体存储和分离、传感器、发光材料和药物输送等众多领域的应用中表现出卓越的性能.利用MOF材料良好的相容性,将MOF和其它功能材料结合形成新的复合材料可以在更大程度上扩大MOF材料的应用领域.与传统的催化剂相比,MOF基材料具有优异的物理化学特性和结构可调性,通过合理的设计能够满足不同的催化加氢过程:(1)MOF基催化剂具有多样且特异性的活性位点.除了组成MOF材料的金属离子/簇和功能有机配体之外,MOF材料可通过封装其他活性物质或者被活性物质包裹等方式引入其他类型的催化位点,进一步扩大MOF基催化剂在不同催化加氢中的适应性.此外,不同的活性位点之间的协同作用又能特异性地促进反应的进行,对提高反应的选择性起到重要的作用.(2)活性位点的尺寸大小和空间分布可以被有效控制.这能影响到催化剂在催化反应过程中的活性和选择性,并且通过MOF材料的限域效应,同时能增强活性位点的稳定性和耐久性.(3)高比表面积能提高MOF基催化剂的催化活性.这种结构特性不仅可以增加MOF基催化剂的活性位点,而且能够吸附反应物和还原剂达到扩大其局部浓度的效果.(4)反应分子的扩散可通过调节MOF基催化剂的结构实现控制.通过调整MOF材料的孔窗口和通道的尺寸,能够改变反应物在催化剂内部的扩散途径,影响底物和活性位点的接触,能进一步影响反应的活性和选择性.本文总结了近几年来MOF基材料在不同的催化加氢反应中的应用,其中包括烯烃、炔烃、芳硝基化合物、肉桂醛、糠醛和苯等化合物的加氢反应.首先介绍了MOF基材料中不同类型的活性位点,除了MOF材料自身的金属离子/簇和功能有机配体外,MOF基复合材料中的金属纳米颗粒?金属硫化物?金属氧化物?均相催化剂等活性位点可以通过封装或包裹的方式引入.在不同加氢反应中,着重介绍了MOF基催化剂中不同类型活性位点的加氢过程中的催化方式、催化剂本身的结构优化及催化剂与反应底物之间的相互作用,以及这些因素之间的协同作用对反应活性和选择性的影响.最后,讨论了MOF基材料在加氢反应中应用存在的问题以及未来发展展望.     

Br?nsted酸性离子液体催化缩醛化反应合成聚甲氧基二烷基醚

聚甲氧基二烷基醚(RO(CH2O)nR)具有高的十六烷值(CN)和含氧量,能显著改善柴油的燃烧特性,有效提高热效率,大幅减少碳烟和NOx排放,被认为是一种优良的环保型燃油组分.随着–R基碳链的增长,CN值、热值和闪点逐渐增大,密度和冷凝点逐渐降低.同时,该类化合物具有优异的溶解及渗透性能,能与许多有机溶剂互溶,低毒,可以用作溶剂或颜料分散剂.近年来,聚甲氧基二甲基醚(CH3O(CH2O)nCH3,PODEn,DMMn)的制备及应用研究受到广泛关注,而对封端基团(–R)碳数大于1的多醚类化合物的研究鲜有文献报道.本文以Br?nsted酸性离子液体为催化剂,对甲醛和二乙氧基甲烷或脂肪醇(碳数 ≥2)缩醛化反应制备聚甲氧基二烷基醚的反应性能进行了研究,考察了离子液体结构和酸性对其催化性能的影响.结果表明,–SO3H功能化的离子液体[MIMBs]HSO4在催化三聚甲醛与二乙氧基甲烷的缩醛化反应中表现出最好的催化活性.考察了催化剂用量、原料配比、反应温度、反应压力和反应时间等因素对反应性能的影响,并得到了最佳反应条件,在n([MIMBs]HSO4):n(DEM1):n(HCHO)=1:80:80,140°C下反应4 h,甲醛转化率达到了92.6%,DEM2–8选择性为95.1%.考察了不同甲醛源(三聚甲醛和多聚甲醛)与提供封端基团化合物(二乙氧基甲烷、乙醇、丙醇和丁醇)的缩醛化反应.结果发现,在反应过程中不生成水或不引入水的条件下,具有更高的反应转化率和产物选择性.分别采用静置分层和萃取实现了催化剂的分离与重复使用.推测反应机理认为,三聚甲醛首先在氢键作用下分解生成甲醛单体,甲醛和二乙氧基甲烷通过碳正离子反应机理实现了DEMn的链增长.     

热溶液中Nafion膜电极电化学分析法测定偶氮二甲酰胺

基于偶氮二甲酰胺在热溶液中的高溶解度及其与Nafion膜电极的静电作用,建立了偶氮二甲酰胺的电化学分析法.考察了偶氮二甲酰胺溶解度的温度效应,研究了偶氮二甲酰胺在Nafion膜电极上还原反应的机理.利用热溶液中偶氮二甲酰胺在Nafion膜电极上的伏安响应,用差分脉冲伏安法测定了面粉中的偶氮二甲酰胺含量.在水浴恒温80℃、pH 6.0的实验条件和优化的测试参数下,Nafion膜电极的电流响应与偶氮二甲酰胺的浓度在0.93～ 10.5 μg/L范围内呈线性关系,检出限为0.58 μg/L(S/N=3),对实际样品测定的相对标准偏差小于5.9％,回收率为95.8％ ～ 104.0％,氨基脲和呋喃西林不干扰偶氮二甲酰胺的测定.     

Synthesis of star polymeric ionic liquids and use as the stabilizers for high internal phase emulsions

A series of well-defined core cross-linked star (CCS) polymeric ionic liquids (PILs) were synthesized via a three-step approach. First, the styrenic imidazole-based CCS polymer (S-PVBnIm) was prepared by the RAFT-mediated heterogeneous polymerization in a water/ethanol solution, followed by the quaternization of S-PVBnIm with bromoalkanes and anion exchange. The CCS polymers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The obtained CCS polymers were used as the effective emulsifiers for oil-in-water high internal phase emulsions (HIPEs). Multiple oils with different polarity including n-dodecane, undecanol, toluene and octanol were emulsified using 0.5 wt% S-PVBnIm aqueous solution under the acidic condition to form HIPEs with long-term stabilities. The excellent emulsification properties of CCS PILs were demonstrated by HIPE formation for a variety of oils. The properties of HIPEs in terms of emulsion type and oil droplet size were characterized by the confocal laser scanning microscopy (CLSM). The intriguing capability of CCS PILs to stabilize HIPEs of various oils holds great potentials for the practical applications.     

Efficient P3HT:PC61BM solar cells employing 1,2,4-trichlorobenzene as the processing additives

The efficiency of the poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl C_(61)-butyric acid methyl ester(PC_(61)BM) based organic solar cells was enhanced by using 1,2,4-trichlorobenzene(TCB) as a processing additive to control the blend morphology. The addition of TCB improved the arrangement of P3HT which resulted in good phase separated blend films. Correspondingly, the optimized solar cells showed a power conversion efficiency(PCE) of 4.17% with a fill factor(FF) of 0.69, which were higher than those of common thermal annealing devices(PCE 3.84%, FF 0.67). The efficiency was further improved to 4.74% by thermal annealing at 150 °C for 10 min with a higher FF of 0.74.